Mobile Units

LAMA 1

Technical Specifications: Connect. Totem – LAMA 1

- All-stainless steel pipes, stainless steel A2, thickness 1mm walls with a cross-section of 32mm, equipped with polymer end caps*
- Disc joints – modular connecting octagon. – material polymer*, cast stainless steel. nut
- Ring screw fasteners - stainless steel A2
- Other stainless steel elements of storage counters, hanging elements and others are without sharp edges.
- Resistance of the surface against acetic acid (3% solution).
- Cleaning will be done with perstilene (3% solution)
- Modular tubular construction of the totem. Height – 1.8 to 2.1m, Floor plan square 0.7x0.7m.
- Other heights of auxiliary static constructions of mezzanines, hangers, including totem stabilization are adjustable. Each vertical stands separately.
- The totem is mobile on wheels with the possibility of grounding.
- All assembly and construction elements, including the fixation of other equipment and devices, are safe and easy to assemble even with protective gloves.

Equipment, devices – part of the Totem connect. structure:

- ATHEX 1 repository – oxygen – material – polymer*, Al*
- Connection to the central distribution of medical gases. 1x input 3x output.
- The station and storage meet the requirements for resistance to water IP min 54, Dust IP min 54, impact IK x, explosive environments (volatile and gaseous substances, dust in the event of a direct threat of ignition, e.g. spark from electrical equipment) - tight closure "d".

- ATHEX 2 storage – other equipment – material plastic*, Al*.
- Modular assembly of a closed system for storing equipment, especially electrical ones.
Patented – CZ 308402 B6.
- LV – 230V 8x + 2x reserve – plug socket, including circuit breakers, 2 sockets for 1 circuit breaker.
- Integrated microphone speaker, for example MONACOR talksave.
- Switch 8 x data connection, has VLAN function, has POE, 48 volt, 802.3, AF/AT or higher supports remote lighting control over POE data network
- Wifi -2.46 / 5G with possibility of central control 802.11r/ CapsMan, virtual AP.
- Connector (socket) for powering the camera and lighting, including remote control.
- Driver for lighting control + connection to the device.
- LV cable + data from a central source. Storage connected with one RADIAL connector. Length as specified. The end of the cable is equipped with a 230V and data busbar.
Both the station and the storage will meet the requirements for resistance to water IP54, Dust IP 54, impact IK x.

Other equipment
– Possibility of attaching or hanging on the structure of the totem pole.
- Local lighting, Hik vision camera capable of PTZ or 360 degrees Codec H. 265+
compatible with sw Hikvision IVMS 4200, Ateas security 514.
- Attaching Medical equipment or aids such as Monitor, monitoring, ventilation, suction pump, infusion hangers, storage for power elements, cable fixing elements (velcro fastener, plastic guide braid and others).

* Polymer / Polymax PTEG – EDS antistatic for El. device. Working temperature of the material 85°C. High UV resistance in the 300-340 nm wavelength of UV radiation in the UVA and UVB range

* AL / ENAC-47100 ENAC-AlSi12Cu1(Fe) (Die Casting).

▪ The device meets the legislative requirements of Act 22/1997 Coll. about the technical requirements of the product.

▪ The equipment complies with the standard ČSN 33 2000-7-710 - Low-voltage electrical installations - Part 7-710: Single-purpose equipment and in special buildings - Medical premises.

▪ The device meets the requirements of the ČSN EN 61000-1-2 Electromagnetic Compatibility (EMC) standard - with an overlap to the ČSN EN 60601-1-2 ED.2 standard - Electromagnetic compatibility of medical devices.

Visuals and pricing upon request.